Adjustable angle knife sharpener
1.Two adjustable manual sharpening slots, easy adjust knob allows sharpening at a wide range of angles(14 degree/side to 24 degree/side)
2.Scissor slot with a unique spring inside for a excellent sharpening, patented sharpening slot design for a variety of scissor and single blade tools.
3.Bottom with anti-slip rubber coating for safe working.
4.Lightweight, compact, and practical
5.Easy to use, simply select the correct angle by pushing and turning the knob.
How to Use:
Sharpening Instructions For Straight Edge Blades:
There has two adjustable slots,The coarse sharpening slot features carbide that are used to sharpen dull or damaged knives. The fine slot features ceramic rods for finishing the knife edge and every day light honing and maintenance of an already sharp knife.
Step 1: Set the sharpening angle by pushing down on the top of the adjustment knob and turning to the desired angle. If factory angle is unknown, use the angle chart on the inside of the insert card or follow suggested angles printed on product and knob.
Step 2: Place sharpener on a flat, sturdy surface and insert knife into the appropriate sharpening slot.
Step 3:With the knife blade straight up and down and fully inserted into the slot, tilt the tip of the blade slightly downward and pull the blade through slot from heel to tip using a smooth, consistent stroke and moderate, downward pressure. If your blade curves up to the tip, lift up on the handle of the knife as you approach this portion of the blade to sharpen all the way out to the tip.
Step 4:Continue pulling the knife blade through slot from heel to tip(never back and forth), approximately 8-10 items until sharp.(the number of pulls depends on the sharpness or damage to the knife)
Sharpening Instruction For Scissors:
The scissors slot features ceramic rods that are used to sharpen scissors.
Removes burrs and polishes the blades to maintain a sharp cutting edge.
1.place the sharpener on a flat surface.
2.Hold the sharpener with one hand and the scissors in the other.
insert the scissor blades into the slots on either side of the ceramic rod and push the scissors forwards and then close the scissors and pull them back out of the slot.
Dimensions: 30cm(W) x 5cm(H) x 10cm(D)
Weight: 0.4 kg
CATEGORY: Kitchen / Knives & Knife Blocks
$44.95